How to Troubleshoot Plumbing Problems 

Even small plumbing issues are difficult to notice, there are things that you can do as a homeowner to spot them. Some of the problems are excessive water usage, noises, low water pressure and slow drains. You can know the causes of them by reading more of this article. Click here for more.  

Plumbing Problems
When There’s a High Water Usage 

If you suspect that you have plumbing issues because your water bill is too high, there are methods you can do. First, listen for the sound of drippings. This is overlooked especially if you have a busy home but try listening to the drips when it’s quiet. Every day one drop will become thousands that will fit a gallon of water.  

Another thing you can do is look for evidence of leak. The leaks can cause mold and mildew and will even make a puddle of water. Pipes with leak will easily corrode and crack. Look for leaks in the walls near the plumbing fixtures. Look under sinks and vanities, look for droplets and touch these spots.  

You can also spot issues when your bathroom makes noises and unusual intervals. When there’s a leak in the toilet, the tank drains slowly. This can waste water and cause your bills to go high. Check the commodes and lavatories especially their supply valves. Turn its packing nut clockwise and check if the leak is stopped.  

Check your water meter regularly so you can monitor your water usage.  Check the displayed amount, wait for one hour or two then come back, make sure that no one used the water at your home. If it’s too high even though no one used the water, then you might have real problems.  

Drain or Waste Problems 

Malfunctioning drains are big problems especially if you’re using them. To know the cause, identify the problem which some of them are tub drains, slow sink and wet areas. Determine which pipe is causing the problem, is the sink connected to other fixture or not? If there’s a main line, then the problems might originate there. Its individual pipes are routed in the wall cavity where it connects with other pipes.  

If you experience a clogged drain, flush it with a very hot water. If that doesn’t work, stop the drain and fill the sink with hot water from the faucet. The water will then drain into material that clogs the pipes. Most of the time, these clogs are food wastes or residue of grease that a hot water can dissolve. The flow will then be restored.  

To make it more effective, use a cleaning product that will dissolve or dislodge the materials. This will stop the causes of clog. You can also use a plumber’s snake to unclog a drain. If you are not careful with this, you might end up compacting the material that’s causing the clog, making it more difficult to remove.  

To avoid all these things, you should do a regular plumbing maintenance so your system will remain on its good condition.  

How to Repair Minor Shingle Roof Leaks

One of the most irritating things could happen when our roof leaks when it rains. This would put us to extra work and hassle, which is such a nuisance because it takes our time instead of just chilling in the cool temperature.


The good news is, if the leaking is just a minor one, we can fix it even with just minimal knowledge and skills about carpentry. This guide would allow you to fix it for yourself, and not waste any more money to repair men.

Considerations Before we Start

Before we start fixing our shingle roof leaks, we have to take necessary considerations or precautions. These are,

  1. Don’t Do the work during rain – Leaks occur during a rain, but it doesn’t necessarily mean we fix the problem during it. For safety purposes, don’t do the work during the rain. Rain makes our surroundings darker, making it harder for us to fix the problem. It also makes the roof slippery, making it dangerous and hazardous for us.
  2. Find an Assistant – Finding an Assistant makes our job easier and will help us perform more effectively. An assistant can be anyone, your wife or your kids. Their only function in this work is to notify you and assist to give you things while you are on the roof.

Here’s how.

  1. Expose the Leak – Leak is our problem, right? So the first thing we should do is to identify its source. Leaking is easily identified on a flat roof, but it can be tricky for slanted ones because some leaking actually comes from damage to the roof that is a good distance away from it.

What you will do to identify the leak is to have a hose and pour water into the area around the suspected place of leaking. Have your assistant ready underneath, to notify you when the leak is identified.

If you have slanted roofing, most likely the damage on the roof is higher than the place of the leaking.

If you have an attic, have your assistant a flashlight to identify water stains, molds, or black marks. This is where, most likely, the leak comes from.

  1. Identify the problematic Shingle – After exposing the leak, you have to identify the problematic shingle that is causing it. Assess if the problem, if the shingle is missing then you have to buy a new one. If it is curled, then you have to straighten it out.
  2. Straighten Curled Shingles – Straightening curled shingles is no easy task, especially if the weather is cold. But this can be solved by heating, particularly heat from an electric dryer. Don’t use heat from an open flame of any kind, it will not solve the problem, it will destroy the shingles even more.
  3. Attaching the fixed Shingle – After extracting and mending the curled shingle, you have to attach it back by using asphalt roof cement. Apply it underneath the single as well as the sides and you are done!

That, Ladies and Gentlemen, is how to repair minor shingle roof leak. If you find the job difficult, you can always ask for a roof leak contractor in Hialeah to do it for you.


Your Tiles and Grout Looking Fresh and Clean

When it comes to kitchens, bathrooms, laundry rooms, or any other room or area that experiences a lot of moisture, no other flooring material does a better job of keeping up with those conditions as well as tiles. Tiles work well with rooms and areas that experience a lot of moisture, that is why most bathrooms and kitchens incorporate tiles in their design, not only do they look good, but they work well too. With tiles, however, you need another material to keep it all together, and that is grout. When it comes to the topic of cleaning, unlike tiles, grout cleaning in Spartanburg  can be a pain, but with the right tips and tricks, it can be as easy as wiping off water from your tiles.


When it comes to cleaning your grout, there are many commercial products out there that can do the job for you. But these products often contain chemicals and although are safe for home use, if misused could potentially be a hazardous risk. Fortunately, there a lot of doing it yourself tips and tricks out there when it comes to the topic of cleaning of grout, tips, and tricks that involve safe, easy to find, everyday items that can help you clean away grout dirt. With these tips and tricks, and with a little bit of elbow grease, your tiles will be looking like brand new in no time.

Grade School science projects are fun, and there is one important project out there that holds the key to cleaning your grout, and that is the baking soda volcano. That is all you need to get started with cleaning your grout, some baking soda, and some vinegar.

Only spread the baking powder along the grout lines using your finger to get those dust bits really in there, and with a bottle sprayer filled with vinegar, spray it onto the baking soda. If you remember that erupting volcano moment back in science class, that is exactly what is happening as well, the bubbling of the baking soda, which chemical reaction is already doing the cleaning for you, and with a toothbrush and some elbow grease, brush that grimy dirt away, while rinsing with some water. Mop away any excess water and baking soda, and there you go, a brand spanking new tile floor. No need for fancy equipment, or some high floor cleaner, just some vinegar, and some baking soda.

Aside from baking soda and vinegar, steam is also a good way to clean away grout, and if you don’t own a steam cleaner, you can rent one at an affordable rate. This is a relatively easier solution and is just as effective. Just add the necessary water for the machine, let it warm up, and with the same moving action you would do as though you were vacuuming the floor, brush the grout lines to remove and clean them.

Tiles are a great flooring material, and with the proper know how and maintenance, your tile floor can look clean as if they were new for years.